Sometimes when you hunting the deer ,you may climb on a tree. But this is a dangerous thing.If you carelessness,you may get injure. These accidents can be prevented through the proper use of a tree stand safety harness. So today let’s talk about how to keep safe on the tree.

1. When hunting from a tree stand, always use some type of fall restraint device or safety harness.

2. Use a safety rope with a prussic knot to secure to your safety harness so that you are always tied in from the ground to the top and back down again.

3.Always use a rope to raise and lower your unloaded gun or bow and arrows up the stand. Never carry your gun, bow or heavy load into or out of the tree stand. Pull them up once you are safely seated in your stand. Unload your gun before pulling it up to, or lowering it from, the tree stand.

4. Purchase a tree stand from a manufacturer who meets the Treestand Manufacturers Association safety standards. Look for the TMA symbol on the box.

5. Inspect your stand prior to the beginning of the hunting season. Check it thoroughly and if it is a permanent ladder stand, check all of the straps for deterioration to make sure the stand is firmly attached to the tree.